Update IPv6

To update IPv6 configurations for LANs in the Data Center Designer (DCD), follow these steps:

1. In the DCD, go to Menu > Virtual Data Centers.

2. Select the VDC and the LAN for which you want to update the IPv6 address, and select the Members tab.

3. You can update your IPv6 CIDR block with prefix length /64 from the VDCs allocated range.

4. Start provisioning by clicking PROVISION CHANGES in the Inspector pane.

Update an existing IPv6 configuration

The Virtual Data Center (VDC) will now be provisioned with the new network settings. In this case, the existing configuration gets reprovisioned accordingly.

Note: IPv6 traffic and IPv6-enabled LANs are now supported for the Flow Logs feature.