There are two ways to access the metrics of an instance: from the Monitoring Manager view or via the Inspector pane.
Inside of the data center view of the DCD, right-click the graphical representation of your server. The context menu will show an item called Monitor, which will open a window with the server's metrics. This window can be minimized to the bottom bar.
The Monitoring Manager allows quick access to all running virtual instances within the contract. It also provides access to the configuration of alarms and actions.
1. In the DCD, open the Management option. A drop-down box displays.
2. Select Monitoring.
3. In the left panel, select the target Dedicated Core server. Metrics for the target server displays in the right-hand panel.
You can access MaaS via the properties panel of a virtual instance.
1. In the DCD, open your virtual data center.
2. Select your Dedicated Core server. The Inspector pane for this virtual instance displays on the right side of the window.
3. Click on the Metrics tab. The CPU utilization graph, followed by other graphs, displays showing the basic metrics for the last hour.
4. In the Inspector, you may select Refresh. The basic metrics are refreshed.
5. You can choose to monitor separately. In the Inspector, select Monitor in Background. A separate window displays. The graphs display an enlarged view. Additional information is available for each graph.
In the upper right corner of the pop-up window there are three buttons: minimize (down arrow), maximize (up arrow) and close (x). You to can either enlarge the view to the entire screen or reduce the view to a monitoring bar, which will remain active in the background.
The monitoring bar remains visible even when switching between VDCs. You can add multiple monitoring views of different virtual instances from different VDCs to this bar. Even if you close a virtual data center, the monitoring bar option will remain active.
The monitoring bar will disappear when you log out of the DCD.
If the VDC is closed, you can reopen the Monitoring Manager and also use the Focus Server option to load the VDC that contains the server instance. The server will be selected automatically. The relevant property panel will become available immediately.
In the Monitor in Background view, you may select the refresh interval as well as the time frame for data retrieval.
You can only choose a time frame of up to two weeks. If you select a wider time frame, MaaS will limit the data reported or it may return an error if no data is available. If you change one or both of these values, the view is refreshed. MaaS will display your latest chosen data in the graph.
If you want to create a long-term history of metrics, we advise you to retrieve the raw metric data and store it. Any data older than two weeks will be purged by IONOS Cloud.
Only contract owners or administrators may configure MaaS by default. Monitored metrics are "read-only" for all other user types. Additional users must be granted access via IONOS Cloud User Management, which is available in the DCD as well as via Cloud API. Prior to setting privileges for an additional user, ensure they have access to the specific VDC.
MaaS has a new group privilege called Access and Manage Monitoring. The privilege must be enabled for a group so that members of the group inherit this privilege through group privilege settings.
Once the privilege is granted, contract users can access monitoring metrics of virtual instances running in virtual data centers that are shared with them. Contract owners and administrators can access monitoring metrics of all virtual instances, as they have access to all VDCs at any given time.
Use the following procedure to manage monitoring privileges:
1. Open Management in the DCD.
2. Select the Users & Groups option under Users.
3. A User Manager modal will open up. Select the Groups tab.
4. Select the target group.
5. Check the Access and Manage monitoring check box. The box turns blue and displays a tick box.
6. Close the User Manager window. Privileges are activated for the selected group.
Revoke user access by either removing the user from all groups that have the privilege enabled or by disabling the privilege in each respective group.
You can revoke this privilege from a contract administrator only by disabling the administrator option on the user account. The respective user will then fall back into the role of a contract user. All privileges that were set up for the user, before nomination as administrator, will then be in effect.
Prerequisite: Make sure your account has Monitoring privileges enabled in the user group.
1. Select the Management option in the main menu bar of the DCD.
2. Select Monitoring in the drop-down menu. The Monitoring Manager panel displays.
3. Select the Create button in the Alarms tab.
4. In the Create panel, create an alarm by performing the following substeps:
Name: choose an appropriate name.
Server: select a virtual instance.
Metric: select the relevant metric.
Unit:
select Total for absolute numbers (example: CPU utilization).
Total is unsupported for other metrics except if you’re using “delta” aggregation.
select a per-time rate in all other cases.
Threshold Type: define equality of value.
Threshold: enter the threshold value.
Range: define the time range for the threshold to hit before trigger.
Range Aggregation: time range aggregation types are Average or Delta.
Alarm Delay: define the duration between two alarms.
Actions: select one or multiple actions upon alarm trigger.
Select Create to save the alarm.
Once an alarm has been created, you can either edit the alarm configuration or delete it if it is no longer needed.
The details view provides an option to list the status and history of an alarm.
Upon alarm trigger, the alarm icon will blink to indicate that the configured threshold has been triggered. The blinking will stop automatically once the system is back within the threshold. This is monitored within the defined duration.
Range Aggregation is provided so that the service does not spam users with emails. Instead, the system will wait between two alarms for a period of time before sending another notice. This will only happen when the criteria for the alarm are still fulfilled. If the criteria do not hit the threshold, no alarm is sent anymore.
The examples below show possible configurations for the expression property of an Alarm.
Current CPU Load for all Cores
Setting a trigger when the average load of all cores over the last hour exceeds 90%.
Increase in Received Bytes
Setting a trigger when more than 1MB is incoming within the last ten minutes.
Sent Packets per Second (lower bound)
Set a trigger when there is less than one outgoing packet per second. ****
Storage Writes per Second
Set a trigger when there are more than 100 write operations per second.
In the Actions section, you can configure an action that will be executed when an alarm is activated. Currently, MaaS supports email notifications.
Prerequisite: Make sure your account has Monitoring privileges enabled in the user group.
1. Open the Monitoring Manager and select the Actions tab. The Actions tab displays.
2. Create an Action by performing the following sub-steps:
Define a name for the action.
Select the action type (send email only at the moment).
Provide an Email address.
Select Create.
After creation, you can edit the action configuration or delete it if not needed anymore.
The details view of a created action contains an option to list the execution history of an alarm.
You can only delete an action when it is not in use by an alarm.
| Default Values |
|---|
| Default Values |
|---|
| Default Values |
|---|
| Default Values |
|---|
"unit": "total"
"rangeAggregation": "average"
"comparisonOperator": "greater_than_or_equal_to_threshold
"unit": "total"
"comparisonOperator": "greater_than_or_equal_to_threshold
"range": "4m"
"rangeAggregation": "average"
"unit": "total"
"rangeAggregation": "average"
"comparisonOperator": "greater_than_or_equal_to_threshold"
