Comment on page

NicProperties

Properties
Name
Type
Description
Notes
device_number
int
The Logical Unit Number (LUN) of the storage volume. Null if this NIC was created using Cloud API and no DCD changes were performed on the Datacenter.
[optional] [readonly]
dhcp
bool
Indicates if the NIC will reserve an IP using DHCP.
[optional] [default to True]
dhcpv6
bool
[The IPv6 feature is in beta phase and not ready for production usage.] Indicates if the NIC will receive an IPv6 using DHCP. It can be set to 'true' or 'false' only if this NIC is connected to an IPv6 enabled LAN.
[optional]
firewall_active
bool
Activate or deactivate the firewall. By default, an active firewall without any defined rules will block all incoming network traffic except for the firewall rules that explicitly allows certain protocols, IP addresses and ports.
[optional]
firewall_type
str
The type of firewall rules that will be allowed on the NIC. If not specified, the default INGRESS value is used.
[optional]
ips
list[str]
Collection of IP addresses, assigned to the NIC. Explicitly assigned public IPs need to come from reserved IP blocks. Passing value null or empty array will assign an IP address automatically.
[optional]
ipv6_cidr_block
str
[The IPv6 feature is in beta phase and not ready for production usage.] If this NIC is connected to an IPv6 enabled LAN then this property contains the /80 IPv6 CIDR block of the NIC. If you leave this property 'null' when adding a NIC to an IPv6-enabled LAN, then an IPv6 CIDR block will automatically be assigned to the NIC, but you can also specify an /80 IPv6 CIDR block for the NIC on your own, which must be inside the /64 IPv6 CIDR block of the LAN and unique. This value can only be set, if the LAN already has an IPv6 CIDR block assigned. An IPv6-enabled LAN is limited to a maximum of 65,536 NICs.
[optional]
ipv6_ips
list[str]
[The IPv6 feature is in beta phase and not ready for production usage.] If this NIC is connected to an IPv6 enabled LAN then this property contains the IPv6 IP addresses of the NIC. The maximum number of IPv6 IP addresses per NIC is 50, if you need more, contact support. If you leave this property 'null' when adding a NIC, when changing the NIC's IPv6 CIDR block, when changing the LAN's IPv6 CIDR block or when moving the NIC to a different IPv6 enabled LAN, then we will automatically assign the same number of IPv6 addresses which you had before from the NICs new CIDR block. If you leave this property 'null' while not changing the CIDR block, the IPv6 IP addresses won't be changed either. You can also provide your own self choosen IPv6 addresses, which then must be inside the IPv6 CIDR block of this NIC.
[optional]
lan
int
The LAN ID the NIC will be on. If the LAN ID does not exist, it will be implicitly created.
​
mac
str
The MAC address of the NIC.
[optional] [readonly]
name
str
The name of the resource.
[optional]
pci_slot
int
The PCI slot number for the NIC.
[optional] [readonly]

Name	Type	Description	Notes
device_number	int	The Logical Unit Number (LUN) of the storage volume. Null if this NIC was created using Cloud API and no DCD changes were performed on the Datacenter.	[optional] [readonly]
dhcp	bool	Indicates if the NIC will reserve an IP using DHCP.	[optional] [default to True]
dhcpv6	bool	[The IPv6 feature is in beta phase and not ready for production usage.] Indicates if the NIC will receive an IPv6 using DHCP. It can be set to 'true' or 'false' only if this NIC is connected to an IPv6 enabled LAN.	[optional]
firewall_active	bool	Activate or deactivate the firewall. By default, an active firewall without any defined rules will block all incoming network traffic except for the firewall rules that explicitly allows certain protocols, IP addresses and ports.	[optional]
firewall_type	str	The type of firewall rules that will be allowed on the NIC. If not specified, the default INGRESS value is used.	[optional]
ips	list[str]	Collection of IP addresses, assigned to the NIC. Explicitly assigned public IPs need to come from reserved IP blocks. Passing value null or empty array will assign an IP address automatically.	[optional]
ipv6_cidr_block	str	[The IPv6 feature is in beta phase and not ready for production usage.] If this NIC is connected to an IPv6 enabled LAN then this property contains the /80 IPv6 CIDR block of the NIC. If you leave this property 'null' when adding a NIC to an IPv6-enabled LAN, then an IPv6 CIDR block will automatically be assigned to the NIC, but you can also specify an /80 IPv6 CIDR block for the NIC on your own, which must be inside the /64 IPv6 CIDR block of the LAN and unique. This value can only be set, if the LAN already has an IPv6 CIDR block assigned. An IPv6-enabled LAN is limited to a maximum of 65,536 NICs.	[optional]
ipv6_ips	list[str]	[The IPv6 feature is in beta phase and not ready for production usage.] If this NIC is connected to an IPv6 enabled LAN then this property contains the IPv6 IP addresses of the NIC. The maximum number of IPv6 IP addresses per NIC is 50, if you need more, contact support. If you leave this property 'null' when adding a NIC, when changing the NIC's IPv6 CIDR block, when changing the LAN's IPv6 CIDR block or when moving the NIC to a different IPv6 enabled LAN, then we will automatically assign the same number of IPv6 addresses which you had before from the NICs new CIDR block. If you leave this property 'null' while not changing the CIDR block, the IPv6 IP addresses won't be changed either. You can also provide your own self choosen IPv6 addresses, which then must be inside the IPv6 CIDR block of this NIC.	[optional]
lan	int	The LAN ID the NIC will be on. If the LAN ID does not exist, it will be implicitly created.
mac	str	The MAC address of the NIC.	[optional] [readonly]
name	str	The name of the resource.	[optional]
pci_slot	int	The PCI slot number for the NIC.	[optional] [readonly]

Models - Previous

NicEntities

Next - Models

NicPut

Last modified 4mo ago