Set Up a Cube
Last updated
Last updated
You can create a Cube, configure storage, connect a Cube to the internet, and provision changes to procure IONOS's resources and make the most efficient use of Cubes to maximize profit.
1. Drag the Cube element from the Palette into the Workspace.
2. Click the Cube element to highlight it. The Inspector pane will appear on the right.
3. In the Inspector pane, configure your Cube from the Settings tab.
Name: Your choice is recommended to be unique to this Virtual Data Center (VDC).
Template: choose the appropriate configuration template.
vCPUs: set automatically when a Template is chosen.
RAM in GB: set automatically when a Template is chosen.
Storage in GB: set automatically when a Template is chosen.
4. You will also notice that the Cube comes with an Unnamed Direct Attached Storage. Click on the storage device and rename it in the Inspector pane.
Name: Your choice is recommended to be unique to this Virtual Data Center (VDC).
Size in GB: Specify the required storage capacity.
Image: You can select one of IONOS' images or use your own.
Password: The combination should be between 8 and 50 characters in length; using only Latin characters and numbers.
Backup Unit: Backs up all data with version history to local storage or your private cloud storage.
1. Drop a Storage element from the Palette onto a Cube in the Workspace to connect both.
2. In the Inspector pane, configure your Storage device in the Settings tab.
Name: Specify a name unique to this Virtual Data Center (VDC).
Availability Zone: Select a zone where you wish to host the Storage device.
Size in GB: Specify the required storage capacity for the SSD.
Performance: Depends on the size of the SSD.
Image: You can select one of IONOS' images or use your own.
Password: The combination should be between 8 and 50 characters in length; using only Latin characters and numbers.
Backup Unit: Backs up all data with version history to local storage or your private cloud storage.
1. Each compute instance has a NIC, which is activated via the Autoport symbol. Connect the Cube to the Internet by dragging a line from the Cube's Autoport to the internet's NIC.
2. In the Inspector pane, configure your LAN device in the Network tab.
Name: Your choice is recommended to be unique to this Virtual Data Center (VDC).
MAC: The MAC address will be assigned automatically upon provisioning.
Primary IP: The primary IP address is automatically assigned by the IONOS DHCP server. You can, however, enter an IP address for manual assignment by selecting one of the reserved IPs from the drop-down menu. Private IP addresses should be entered manually. The NIC has to be connected to the Internet.
Failover: If you have an HA setup including a failover configuration on your VMs, you can create and manage IP failover groups that support your HA setup.
Firewall: Configure a firewall.
DHCP: It is often necessary to run a DHCP server in your virtual data center (e.g. PXE boot for fast rollout of VMs). If you use your own DHCP server, clear this checkbox so that your IPs are not reassigned by the IONOS DHCP server.
Additional IPs: In order to use "floating" or virtual IPs, you can assign additional IPs to a NIC by selecting them from the drop-down menu.
1. Start the provisioning process by clicking PROVISION CHANGES in the Inspector pane.
2. The Provision Data Center dialog opens. Review your changes in the Validation tab.
3. Confirm changes with your password. Resolve outstanding errors without a password.
4. Once ready, click Provision Now to start provisioning resources.
Result: The data center is now provisioned with the new Cube. The DCD will display a Provisioning Complete notification once your cloud infrastructure is ready.
